Remote Control

Remotely control and adjust display devices through a single platform to ensure system stability and optimal performance.

Open the Remote Control Panel

1. Click Device List.

2. Select the device(s) you want to control remotely.

3. In the dropdown menu on the right control panel, select Device Control.

4. On this control panel, you can perform the following actions:

   1. Adjust the display settings of the device

   2. Change the device’s input source

   3. Use the virtual remote control

If the device you want to control remotely shows a red or yellow light indicator, it means the device is powered off or in sleep mode. Please power on the device to switch the status to green before performing any remote operations.

Adjust the display settings of the device

1. Click Display Settings to view the current display configuration of the device.

2. On this page, you can perform the following actions:

   1. Adjust brightness

   2. Adjust volume level

   3. Adjust RGB data

   4. Enable/disable the device’s physical remote control

   5. Enable/disable the physical button controls on the device

3. Use the sliders to modify the values.

Change the device’s input source

1. Click Input Source to view the list of available input sources.

2. Select an option from the list to switch the selected device to that source.

Use the virtual remote control

1. Click Remote Control to remotely operate the device.

2. A built-in virtual remote control will appear on the screen.

Virtual Remote Control Introduction

1. The virtual remote control allows you to perform the following actions:

   1. Power On / Off

   2. Screenshot

   3. Switch Input Source

   4. Settings

   5. Back

   6. Up

   7. Left

   8. OK

   9. Right

   10. Down

   11. Volume Down

   12. Volume Up

   13. Mute